Special Detectors

• Two operational modes (addressable for the Digiplex EVO series or conventional relay operation)
• Remote test mode when used with TestTrek V2
• Full audio and infrasonic spectrum analysis
• 7 frequency digital filters, digital amplifier gain and f...

• Conventional relay operation only
• Remote test mode when used with Test Trek V2
• Full audio and infrasonic spectrum analysis
• 7 frequency digital filters, digital amplifier gain and frequency fluctuation assessment
• Impact and shock wave analysis
• High-imm...

• Cutoff frequency ~ 4 KHz
• Detection range of up to15 m radius
• Suitable for surface and corner mounting alike (horizontally or vertically)
• Tamper switch

• Range – 30 metres
• Coverage – 70° horizontal, 70° vertical
• Frequency – According to national standard
• Antimasking
• Supply voltage – 10,5 – 14 VDC
• Consumption – 18 mA nominal
• Dim...

• Range: 13 m with anti-masking device
• Coverage: 160° horizontal, 90° vertical
• Main frequency: in accordance with national frequencies
• Rated voltage: 10,5 – 14 Vdc
• Consumption: 20 mA rated
• Dimensions without bracket: 50×65×45 mm

...Alfa is little, antimasking, with joint included. Alfa is part of a Cias program of “return of microwave” in indoor protections, this means return to reliability and high security, not only in banks or high risks sites, but also in the civil sector.

• Alfa is a doppl...

Armidor is a volumetric microwave detector operating on the doppler principle, with both tx and rx units combined in the one head. Armidor can be installed to create a protection field of 90° in the horizontal plane and 20° in the vertical plane. this volumetric protection can be adjusted fro...

• High sensitivity piezo-electric element detects surface scratching
• Designed for protection of: – Metal cabinets – Metal doors – Concrete walls of bank vaults – Walls of premises with high level of security
• 5 adjustable levels of sensitivity
• T...

MS96 is a traditional seismic detector equipped with a shock and break-in function. It may be connected to any control panel supporting ON/OFF and/or balanced inputs. Output contacts are generated by a photo-coupler circuit, which is known to display no sensitivity ...

• Detector for protection of Safes and of Reinforced Concrete Structures
• Microprocessor technology with fully digital sensor running
• Galvanic isolation between the area of the connections and the detection & analysis unit.
• Cyclical Autotest in the two channels with ...