ASX Range Fire Detectors

Hochiki’s Multi-Sensor is a combined Photoelectric Smoke sensor which has an unique ‘Flat Response’ chamber design and a highly linear Thermal sensor within the same housing. This enables the sensor to be equally sensitive to a wider range of combustible materials, thus remo...

ACB-E is a Multi-Heat Sensor, which is fully compatible with Hochiki.s ESP Analogue Addressable Protocol.
The ACB-E incorporates a Variable Temperature heat element and a Rate Of Rise heat element, both of whi...

The ASX Range lonisation Sensor is still provided for product continuity in certain markets. A non-pulsing variant for architectural applications where a flashing LED is not acceptable is also available.

Specification

Senso...

The ASX Range Photoelectric Smoke Sensor with ‘Flat Response Technology’ is suited to a wide range of applications. It can be installed in areas where both traditionally photoelectric and ionisation sensors have been used, thereby providing a simpler solu...

Each sensor has its ESP loop address set between 1 and 127 by a simple solid state programming method. The sensor’s address is stored in a nonvolatile memory within the sensor, the address can be changed from the factory default by using a hand-held programmer....

A recessed base adaptor is available allowing sensors to be flush mounted to the ceiling surface.

Specification

Part No. : YBN-R/3 YBN-R/3 (Black)
Connection
Terminal : Function
1&2 : Loop + ve
3 : Earth terminal
4 : Remote L...

Model YBO-BSB is an addressable loop powered Base Sounder with integral Beacon, innovatively designed to give a range of tones and volumes with a maximum output of up to 98dB(A)(±2dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (...

Model YBO-BS is an addressable loop powered Base Sounder innovatively designed to give a range of tones and volumes with a maximum output of up to 98dB(A) (±2dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBN-R/3) or the Isolat...

Features – Single Loop Address – Loop Powered – 2 Independent Inputs for Monitoring of Volt Free Contacts – Each Input can be Configured to Monitor either Normally Open or Normally Closed contacts – “Smart-Fix” Housing System for flexibility ...

Features – Loop Powered – Single Address – 2 Independently Controlled Changeover relays – Relays Contact Rated at 30Vdc at 1 amp – Auxiliary Monitored Input – “Smart-Fix” Housing System for flexibility – Available as DIN-Rail versio...